Manganese EDTA
- Manganese EDTA contains chelated manganese as EDTA in solution equivalent to 6.4% w/v manganese
- Manganese is involved in the production of chloroplasts, availability of manganese is limited where soils are light, high in pH, or during periods of drought
- Formulated for optimum leaf coverage and absorption to correct deficiency in a wide range of agricultural and horticultural crops
- Manganese EDTA Label
- Manganese EDTA MSDS
| Ingredient | |
| 6.4% w/v manganese | |
| Dose rate | |
| 1.5 – 3.0 L/ha | |
| Water volume | |
| 200 – 1000 L/ha | |
| Latest timing | |
| Depends on crop. See product label | |
| Spray quality | |
| A medium quality spray (See BCPC Nozzle Selection Handbook) for Sugar Beet and water volumes of 80 l/ha (8 gal/ac) sprayed as a fine quality spray gives satisfactory results | |
| Pack size | 15 L |
| No. in outer | 1 |
| Pallet | 40 |
Zinc EDTA
Zinc deficiency is now considered a more widespread problem than once thought. Soil and tissue analysis are a good yardstick by which to determine if zinc deficiency may be a problem. Soil zinc levels <2ppm (EDTA) or tissue level < 20 ppm are indicators that zinc deficiency is a problem and treatment will be required to prevent yield loss occurring.
| Active Ingredient | |
| 9.3% w/v zinc | |
| Dose rate | |
| 1.5 L/ha | |
| Water volume | |
| 200 L/ha | |
| Latest timing | |
| Depends on crop. See product label | |
| Spray quality | |
| MEDIUM spray. Nozzle pressure not exceeding 2.5 bar (35 psi) | |
| Pack size | 15 L |
| No. in outer | 1 |
| Pallet | 40 |